1. KIMMCO Building Roll (KBR)
KIMMCO building rolls are manufactured from stable glass fibres bonded with thermosetting resins. They are light in weight, strong, resilient and easy to handle.
For thermal and/or acoustic insulations of all buildings walls and roofs.
Facing & Covering
KIMMCO building rolls are available unfaced or with a variety of facings to suit the applications: white vinyl, FSK, metallized polyester, Kraft paper and glass tissue.
GLASSWOOL BLANKET INSULATION
|24KG/M3 DENSITY GLASS WOOL INSULATION 20M X 1.2M X 25MM FSK WITH ONE SIDE ALUMINUM FOIL|
|24KG/M3 DENSITY GLASS WOOL INSULATION 10M X 1.2M X 50MM FSK WITH ONE SIDE ALUMINUM FOIL|
GLASSWOOL PIPE INSULATION
|1/2" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|3/4" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|1" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|1.1/2" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|2" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|2.1/2" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|3" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
|5" 64 KG/M3 DENSITY, PIPE LENGTH 1.2MTR/PC|
WORKING TEMPERATURE: Fibre 230 °C; FSK 100 °C; Vinyl 80 °C; Metallized polyester 80 °C.
PERMANENCE: Dimensionally stable under varying conditions of temperature and humidity, rot proof, odourless, non-hygroscopic and will not sustain vermin or fungus; Longer life due to no sag and settling.
2. Rock Wool India
wired mattresses conform to ASTM C - 553, C - 592 and BS- 3958 part 3. It is used in the thermal insulation of large vessels, boilers, small machinery, equipment, ducts, flanges, valves and plants operating at high temperatures.
Has a service temperature of 750 °C when tested in accordance with DIN -52271, and ASTMC - 411.
Non-combustible when tested in accordance with BS - 476 part - 4 and ASTM E - 136. Class1 when tested in accordance with BS - 476 part 7, (ASTM E- 84).
wired mattresses are available with wired mesh on one side SS.
Non-hygroscopic, non-capillary and does not absorb any moisture from the air. Moisture has no effect on the stability of the mattresses.
Available in densities from 128kg/m in standard width of 1.22meters and length of 1.64meters. Non.
|LRB 128KG/M3 X 50MM THICK, 4 X 1.22M WITH GIFACING ONE SIDE (1" X 24 G )|
|LRB 128KG/M3 X 75MM THICK, 4 X 1.22M WITH GI FACING ONE SIDE (1" X 24 G )|
|LRB 128KG/M3 X 100MM THICK, 3 X 1.22M WITH GI FACING ONE SIDE (1" X 24 G )|
mattresses are packed in HDPE bags.
3. Foam Insulation
Gulf-O-Flex Sheet Rolls Insulation are flexible, elastomeric thermal insulations, black in color.
|GULF O FLEX SHEET ROLL 3/4" - 1.1M X 10M|
|GULF O FLEX SHEET ROLL 1 - 1.1M X 10M|
Under the supervision of our R&D dept. based on Germany consistently provide actual values on these key performance criteria for mechanical system insulation. Thermal Conductivity: 0.0391w/m-K in 40°C. Fire Rating: Class 0 and Class 1 under the specification of BS 476 Parts 6 & 7.
Gulf-O-Flex is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems.
Morgan Thermal Ceramics offers Refractory Monolithic Material for High Temperature Applications.
High strength products combine excellent performance with ease of installation.
Morgan Thermal Ceramics announces the availability of its high-strength, low cement range of refractory monolithic lining materials ideal for demanding, high temperature applications in the metals, incineration, power generation and minerals processing markets. The full range of products includes Tri-Mor® Morflo® low cement castable and Tri-Mor® Higun® low cement gunning materials. They offer excellent resistance to chemical attack and abrasion, combining the traditional high performance qualities of high fired brick with the ease of installation of a refractory castable.
These advanced materials are ideal for use in forge furnaces, rotary kilns, rotary hearths, pusher furnaces, skid kid pipe protections, and troughs for molten copper. The availability of the full range of products offers significant benefits, as walls and floors can be lined with the Morflo® castable material, while roofs can be gunned with the complementary Higun® material.
The Tri-Mor® Morflo® low cement castable materials feature high fluidity for ease of placement without any impact on strength. They can be installed in tough to place furnace areas with minimal vibration. They are available in two temperature grades– Tri-Mor® Morflo® 160 is rated to 2912°F (1600°C), while Tri-Mor® Morflo® 170 is rated for 3092°F (1700°C).
Tri-Mor® Higun® low-cement gunning materials, designed to be installed using conventional gunite equipment, combines the superior physical properties of a low-cement monolithic with the placement advantages of a gunning material. They are available in two temperature grades - Tri-Mor® Higun® 160 rated to 2912°F (1600°C) grade and Tri-Mor® Higun® 170 rated up to 3092°F (1700°C).
Along with a complete range of refractory monolithic products, Morgan Thermal Ceramics also offers expert engineering design support, with professionals who can recommend high performance, cost effective products and designs for specific applications.Products available for high temperature casting Tri-Mor HT Castable and Tri-Mor Triset D which has Maximum Service Temperature 1,700 °C.
Tri-Mor HT Castable
A 1700°C low iron 60% alumina castable with good working properties and excellent thermal shock resistance.
|Raw Material Base||Calcined Chamotte and Bauxite|
|Maximum Service Temperature °C||1700|
|Refractoriness °C (Seger Cone)||1790 (36)|
|Bulk Density kg/m3 Dried to 110°C||2210|
|Net Material Required Cast (Gunned) kg/m3||2130 (n/a)|
|Test Temperature °CCold Crushing Strength N/mm2||Permanent Linear Change %|
Thermal Conductivity at mean temp. 600°C (W/mK)-0.86
|% by weight||11-13|
Samples Prepared By : Hand Casting
Reference No: TMD455/01/5
Tri-Mor Triset D
Triset D is a fine grained, 45% alumina, air setting cement which features a low drying shirnkage. It is suitable for use in boilers, chimneys, flues, incinerators and other high temperature vessels.
|Bond Type||Air Setting|
|Raw Material Base||Alumino Silicate|
|Maximum Service Temperature °C||1700|
|Refractoriness °C (Seger Cone)||1770-1790 (35/36)|
|Method of Application||Trowelling, dipping or brush coating|
|Water Addition (% by weight) Litres 25kgs||12-16%|
|Rate of Usage||a) Jointing 175/200kgs to lay 1000 bricks|
b) Coating - 25kgs to coat 10m2 to a depth of 1mm
Reference No. TM D701/02/2
Refractory bricks and fire ClayWe offer superior High Alumina Refractory Bricks that are made from high grade raw materials. We have firmly positioned ourselves as one of the fastest emerging Insulating Refractory Bricks supplier based in Dar es Salaam. Our Refractory Bricks are in huge demands in the global markets for excellent strength and abrasion resistance nature. Refractory Bricks provided by us are available in 230x115x75 dimensions.
|Type||Al2O3 %||Fe2O3 %||PCE OC||App. Porosity %||BD Min Gms/cc||CCS Kg/Cm2||RUL (TA) 0C||% PLC @ °C/hrs Max.|
|JR40||40||3||32||25||2||300||1400||°0.8% @ 1400/2 hrs|
Refractory Mortars / ClayWe provide highly efficient Refractory Mortars that are manufactured using superior quality raw materials. Utilization of advanced technology machines in the production assures high performance of Castable Refractory Mortars.
Pressure and Temperature Gauges
1. Pressure gauges
We offer pressure gauges from Baumer that can draw on a substantial depth of experience with electronic and mechanical pressure measurement devices. As the inventor of the Bourdon tube, Baumer Process Instrumentation (formerly Bourdon-Haenni) is a proven expert in manometers.We stock gauges 1.6, 6, 10, 16, 20, 25, 40, 60, 100, 200, 250, 350, 400 and 600 bar in different dial sizes of 2.1/2", 3", 4", 6" and 10" with both bottom entry and back entry. Gauges available in both options with damping fluid and without damping fluid.
2. Temperature gauges
Mechanical thermometers are a good choice for a local display close to the process. They function reliably even without any current being supplied to the system and allow you to check the process' condition. Our product range also includes electronic temperature measuring equipment and is constructed in a flexible modular way. The CombiTemp system includes a series of basic elements which can be combined as various temperature sensors and temperature measurement transmitters.Temperature gauges available 0-60, 0-100, 0-200, 0-160, 0-200, 0-250, 0-400, 0-500 with 4" dial range.
3. Temperature switches
Thermal processes require regulation and control, reason why you encounter temperature switches everywhere. By opening or closing the circuit, the switches start or stop a process (pumps, coolers, heaters, etc).
4. Pressure switches
|U SYPHON 3/8"|
|U SYPHON 1/2"|
|COIL SYPHON 1/2" M/F|
Gasket / Packing Materials
We offer High pressure packing materialranging from;
1. Spitmaan Style 51 High Pressure
Description: Manufactured from selected Asbestos Fibre and bonded with high grade binder compound, this product has a wide range of applications in the industrial field. Brown / Grey or Graphited finish.
Services: Recommended against steam, neutral non flammable gases, dyes alkalies, fats, oils, alcohols, motor fuels and such other engineering services, which do not warrant the use of as High Grade material such as SPITMAAN Style 54 super.
Identity Colour: Brown / Gray or Graphited
|Recommended Maximum Temperature||440°C.|
|Recommended Maximum Pressure||80 kg/cm2.|
|Specification Compliance||IS 2712 - 1998|
IS 2712 - 1979 Grade W/2
IS 2712 - 1971 Grade B/S
BS 2815 - 1973 Grade B
2. Spitmaan Style 51 Metallic
Description: A compressed Asbestos fibre jointing with wire gauze insertion supplied with graphite finish. Used for a wide range of industrial application and Engineering Service conditions which do not warrant the use of High grade material as SPITMAAN STYLE 54 SUPER
Identity Colour: Graphited Black
|Recommended Maximum Temperature||480°C.|
|Recommended Maximum Pressure||100 kg/cm2.|
3. Spitmaan Style AF 159
Service: High resistance to hot oils, fuels, hydrocarbons and refrigerants. Good steam resistance. Excellent creep resistance. Very low gas permeability. Available with wire gauze insertion. Also available with anti-stick coating or graphite coating.
Identity Colour: Gray
|Temperature Rating||Max. Short Term Service Temperature 450°C|
Max. Continuous Service Temperature 250°C
Max. Operating Temperature for Steam 200°C
|Max. Operating Pressure in Bar||150 bars|
4. Spitmaan Spiral Wound Gaskets
Construction: Special Spring like Metal strips are wound with an Asbestos Filler by a special process to assure a leak proof seal. The sealing is done by the Asbestos Filler and the metal strip provides the spring. This combination of metal and soft asbestos Filler piles compresses to its predetermined thickness under bolting pressure and thereby preventing leakage within the limit of its specified pressure and temperature ranges. With the addition of Centering devices, adapt "SPITMAAN" Spiral Wound Gaskets to use on many types of flanges and closures.
Standard materials are type 304 Stainless steel with white Canadian (Chrysotlie) Asbestos Filler.
Materials available are:
|Type 304 Stainless||Compressed Asbestos Jointing Strips|
|Type 316 Stainless||P.T.F.E. Sintered Strip|
|Copper||White Chrysotile Asbestos|
|Monel||Blue African Crocidolite|
|Steel, Zinc Coated|
Gasket Thickness Available:
|1/8" (3.2 mm)||.125" - .005" (3.2 mm)|
|3/16" (4.8mm)||.175" - .005" (4.5 mm)|
Hints Of Installation & Maintenance:
When installing a Spiral Wound Gasket, check the dimensions of the Gaskets for use between pipe and pressure vessel flanges. The procedure is as follows:-
1. Measure ID of flange contact face.
2. Measure Gasket ID. If Gasket ID is not 1/8" larger than flange ID, do not use it unless it can be installed perfectly centered.
3. A Spiral Wound Gasket does not have the same feel as other Metallic or Non-Metallic Gaskets during the bolting-up. It's different-because it gives a little bit under each bolt as it is tightened. It is therefore important to tighten the bolts in small steps in proper sequence as shown hereunder. Final tightening must be uniform with each bolt pulling same load. This will guarantee a trouble free joint. If not uniform, the joint may leak-particularly after it has been in hot service. Tighten the bolts after 24 hours and again a week later.
How To Order:
When ordering "SPITMAAN" Spiral Wound Gaskets, give the following information:
2. Gasket shape
3. Inside and outside Dimension of Gaskets
4. Flange width
5. Gasket Thickness
6. Operating Pressure
7. Operating Temperature
Industrial Power Transmission
- Preloaded - fit and forget
- Ball swaged holes - combats fatigue
- Shot peened - for reduced fatigue
- Deep waisted - side plates reduce stress
- Case hardened pins - extended life
- Seam orientated bushes - reduced wear
- Taper and Pilot bored
- Simplex, Duplex and Triplex
- Wide range of sizes
- Classical Belts (M/Z, A, B, C, D)
- Wedge Belts (SPZ, SPA, SPB, SPC)
- CRE Wedge Belts (SPZX, SPAX, SPBX, SPCX)
- CRE Classical Belts (ZX, AX, BX, CX)
Taper bored V Pulleys
- Broad range of sizes
- Manufactured from high grade iron
- Balanced to Q6.3
- Range of variable speed pulleys
Submersible Pumps & Boiler Feed Water Pumps
1. Submersible pumps 50 Hz
We are distributors of Shakti submersible water pump which is in high demand due to its innovative mechanical design and impeccable quality. It has carved a niche as the most predominant submersible pump and the company is one of the leading suppliers of submersible pumps in India. It is available in all size range starting from 100 mm. Shakti submersible pumps are manufactured from the superlative quality raw material using advanced fabrication technology, which ensure optimum performance and excellent quality.
Pump body is made with anti corrosive material with high wear resistance resulting in reduction in running costs and higher pumping efficiency and longevity. The pump can work continuously for a longer period of time without any trouble. Higher reliability and best results even under harsh conditions make it acceptable to its users.
Our Product Range
- 100 mm well size (4")
- 150 mm well size (6")
- 200 mm well size (8")
- 200 mm well size (10")
- 250 mm well size (12")
- 300 mm well size (14")
2. Vertical Multistage Centrifugal Pumps 50 Hz7
The SCR Pumps are non-self-priming, vertical multistage centrifugal pumps. The in-line design enables the pumps to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. This provides a more compact pump design and pipe-work. SHAKTI SCR pumps are available in various sizes and different number of stages to provide required flow and pressure for various applications from domestic to industrial to meet specific needs. The pump unit is designed for optimized hydraulics with different types of connections, outer sleeves and other parts. SCR pumps are available in different material of construction (MOC) depending upon the nature of applications.
Welding Electrodes, Cutting & Grinding Disks
- MILD STEEL ELECTRODES - E6013
- LOW HYDROGEN TYPE - E7018
- STAINLESS STEEL ELECTRODES - E 308, E 309, E 316
- CAST IROM - Non Machinable and E NiCrFe and E NiCrFe
Bolts and Nuts
We serve with a range of screw bolts, hex head bolts, threaded rods, nuts, rawl bolts, through bolts, U bolts and circlips.
Teflon, Nylon, Fabric Shafts And Sheets
We stock a wide range of Teflon, Nylon, Fabric Shafts And Sheets for industrial application.
|PTFE ROUND BAR|
|1||16.0 MM - 1000MM LONG|
|2||20.0 MM - 1000MM LONG|
|3||25.0 MM - 1000MM LONG|
|4||32.0 MM - 1000MM LONG|
|5||40.0 MM - 1000MM LONG|
|6||50.0 MM - 1000MM LONG|
|7||60.0 MM - 1000MM LONG|
|8||75.0 MM - 300 MM LONG|
|9||80.0 MM - 300 MM LONG|
|10||100.0 MM - 300MM LONG|
|11||125.0 MM - 300MM LONG|
|12||150.0 MM - 300MM LONG|
|PTFE HOLLOW SHAFT|
|PHENOLIC COTTON ROUND BAR|
|25||25.0 MM - 1000MM LONG|
|26||32.0 MM - 1000MM LONG|
|27||40.0 MM - 1000MM LONG|
|28||50.0 MM - 1000MM LONG|
|29||60.0 MM - 1000MM LONG|
|30||65.0 MM - 1000MM LONG|
|31||75.0 MM - 1000MM LONG|
|32||75.0 MM - 300MM LONG|
|33||100.0 MM - 300MM LONG|
|34||100.0 MM - 1000MM LONG|
|35||125.0 MM - 300MM LONG|
|36||150.0 MM - 300MM LONG|
|NYLON ROUND BAR|
|37||16.0 MM - 1000MM LONG|
|38||20.0 MM - 1000MM LONG|
|39||25.0 MM - 1000MM LONG|
|40||30.0 MM - 1000MM LONG|
|41||35.0 MM - 1000MM LONG|
|42||40.0 MM - 1000MM LONG|
|43||50.0 MM - 1000MM LONG|
|44||65.0 MM - 1000MM LONG|
|45||75.0 MM - 1000MM LONG|
|46||80.0 MM - 1000MM LONG|
|47||100.0 MM - 1000MM LONG|
|48||125.0 MM - 1000MM LONG|
|49||150.0 MM - 1000MM LONG|
|PTFE SHEET THICKNESS|
IN MM 1.2MTS X 1.2MTS
|PHENOLIC COTTON CLOTH |
SHEET THICKNESS IN MM 1MTS X 2MTS
|NYLON SHEET THICKNESS |
IN MM 1.2MTS X 1.2MTS
|62||6MM - 1.2M X 1.2M|
|63||6MM - 1.0M X 2.0M|
|64||12MM - 1.0M X 2.0M|
|65||14MM - 1.0M X 2.0M|
|66||16MM - 1.2M X 1.2M|
|67||16MM - 1.0M X 2.0M|
|68||20MM - 1.0M X 2.0M|
|69||25MM - 1.2M X 1.2M|
- Thermal Ceramics
- Thermal Ceramics
- KIMMCO Aluglass Duct System (KADS)
- KIMMCO Building Roll (KBR)-leaflet
- KIMMCO Building Roll (KBR)-leaflet2
- KIMMCO Fire Mailer
- RockWool Building Roll
- RockWool Mattress
- Baumer Catalogue
- Glossy Challenge FolderbroV4
Tri-Mor HT Castable Product Data
Tri-Mor Triset D Product Data